A "How To" On Connecting Through Dial Up And Broadband

A) DIAL UP

Requirements for dial up:

1) An account with an isp (internet service provider)
2) A computer capable of connecting to the internet
3) A standard 56k modem
4) Telephone line

How to install dial up

Connect the modem to an open pci slot(internal modem) or connect it to a usb port (external). After the modem is in place, you can connect the telephone cord from the telephone to the modems phone icon, however this is not advisable due to interferences. You may want to connect it directly from the wall jack telephone line to the jack icon on the modem. Now you may switch the computer on and start configuring so that you can connect to the internet

How to configure dial up in xp

1) Click start>control panel>network internet connections
2) Open ''new network wizard'' click next> ''connect to the internet'' click next>''setup my connection manually'' click next>''connect using a dial up modem'' click next
3) Type the name of your isp click next>type the user name password click next
4) Set whether or not you want available to all and if you want a desktop shortcut

Connecting

1) If you placed a shortcut open it and provide a username and password Specify whether or not to save it and whether or not to allow anyone to access the internet
2) Click dial and wait for the connection. Thats it!

B) CABLE CONNECTION

Requirements for cable connection

1) TV cable
2) Computer capable of connecting to the internet
3) Modem with coaxial port
4) Account with an ISP

How to install a cable connection

Install your cable modem and Windows will automatically detect it for you Now connect the tv cable from the wall to you modem. Install any given software. The modem will usually have two inlets, one for the TV and one for the cable from the wall. Alternatively, a splitter can be used

How to configure cable connection

1) Click start>control panel>network internet connections
2) Open ''new network wizard'' click next> ''connect to the internet'' click next>''setup my connection manually'' click next>''connect using a broadband connection that requires a username and password'' click next
3) Type the name of your isp click next>type the user name, password click next
4) Set whether or not you want available to all and if you want a desktop shortcut

Connecting

1) If you placed a shortcut open it and provide a username and password Specify whether or not to save it and whether or not to allow anyone to access the internet
2) Click connect and you should be connected immediately. Thats it!

C) DSL

Requirements for DSL connection
DSL ready line
Account with an ISP
DSL modem
computer capable of connecting to the internet
ASDL NIDS POTS Splitter

How to install DSL connection

The splitter is used so that it prevents any interference due to higher frequency used in DSL. Connect the telephone wires to the splitter and lead a cable from the splitter to the DSL modem. Connect the modem to your computer and install any software given.

How to configure DSL connection

1) Click start>control panel>network internet connections
2) Open ''new network wizard'' click next> ''connect to the internet'' click next>''setup my connection manually'' click next>''connect using a broadband connection that requires a username and password'' click next
3) Type the name of your isp click next>type the user name, password click next
4) Set whether or not you want available to all and if you want a desktop shortcut

Connecting

1) If you placed a shortcut open it and provide a username and password Specify whether or not to save it and whether or not to allow anyone to access the internet
2) Click connect and you should be connected immediately. Thats it!

Streamyx
WIMax
Streamyx 512k
Streamyx Combo Terms and Conditions
Streamyx Coverage
Streamyx Combo 110
Streamyx
Streamyx Free Modem
Streamyx Installation Guide
Streamyx Online Registration
Streamyx Registration
Streamyx Combo 90
Streamyx Fixed Ips
Streamyx Business
Streamyx Business Corporate

How to Connect an iPod or Other Digital Music Player to Your Car Stereo

I recently "sold out" and bought myself an iPod. Here's a pro's guide to hooking it up to your head unit!

But first...

Unless you've been living in a cave for the past few years, you have heard of the iPod; Apple's wonderfully designed portable music player. The iPod allows you to carry the music of hundreds or thousands of CDs in a small box that fits easily in your pocket or bag. It is capable of much more, but the focus of this article is on the music. Because of the extreme portability of the iPod, many people want to bring it with them in the car. This is a problem because most cars don't offer iPod connectivity, with few exceptions. Fortunately, there are solutions for people who want to use their iPod in the car.

Direct connection:

Pros: Control iPod with stereo and remote controls, automatically charges iPod, perfect sound quality, easy to install, cheap Cons: None that I know of!

This option is only available to owners of radios that support a direct connection to the iPod. Basically, all you need is a cable that connects to your iPod, then to the radio. Alpine is one brand I know that offers this feature. Some new vehicles also offer a direct connection to the iPod.

How to connect via an interface:

Pros: Control iPod with stereo and remote controls, automatically charges iPod, perfect sound quality Cons: Expensive, more complicated to install

This option is available to owners of more up-to-date aftermarket radios and some newer factory radios.

Aftermarket radios:

You'll need a brand specific ipod interface. For example, if you have an Alpine head unit, you'll need to get an Alpine ipod interface. Usually, this interface is a small box that has an output to your radio, and an input that connects to to your ipod. Basically, you'll need to find an appropriate mounting location for the box. From there, find a good place to route the ipod cable. Some good locations are inside the glove box, or if you have a pocket in your dash, route it through there.

Factory radios:

You'll need a vehicle specific ipod interface. The one company I know of that manufactures these interfaces is Peripheral. Check out their website to see if your vehicle is supported. If yes, you're set! Hook up the interface similar to how you would above.

How to connect via a phono to RCA cable.

Pros: Excellent sound quality, easy installation, super cheap Cons: Can't control ipod with stereo, ipod won't automatically charge

You will need a head unit that has an auxillary input for this to work. If your head unit does not have an aux in, you're probably better off looking for another alternative.

How to connect an iPod through FM modulation:

Pros: Very easy to setup and install, device is widely available, most devices charge the iPod Cons: Not the cheapest, poorer sound quality, ipod can't be controlled by radio

This is the easiest way to hook up an iPod to your radio. Basically, your ipod connects to a device that broadcasts the music to a radio station frequency. Tune your radio to that frequency, and your music will play through the radio. There are a variety of products available that do this.

Other digital music solutions:

Kenwood makes a "music keg", which is basically a portable hard drive that interfaces with the Kenwood receiver. This is a great alternative to bringing an iPod with you in the car. Just load up the music keg, and your songs are good to go.

Alpine makes a digital music player. This device contains a hard drive that you can load up with your songs. It works very similarly to a CD changer in that it is controled by the head unit.

A brief word about other digital music players:

The iPod is not the only digital music player available. Creative Labs has the Zen, and Microsoft just released the Zune. There are many other devices available as well. If you have one of these other digital music players, you can still use some of these techniques to connect your player to your head unit.

Unfortunately, the iPod has been embraced much more than its competitors, so as far as I know, there are no interfacing options available for the other digital music players. You can still connect the device to your head unit through a mini phono to RCA cable. You can also find FM modulators that are not iPod specific which will allow you to connect to your head unit through the radio.

A brief word about digital music formats, compression, and sound quality:

So, back in the ice ages, like 10 years ago, a new digital format known as MP3 began to take the internet by storm. Basically, it allowed a full CD of music to take up minimum space on a person's hard drive. Before MP3, the main format available to most people was PCM (aka WAV). PCM is basically an exact replica of the information stored on CDs. Anyway, MP3 changed that. It was now possible to compress the music to a significantly smaller file size. In general, you could fit 10x the data in the same space. Where a typical WAV file of a song might take up 50 Mb, an MP3 file of the same song might take up 5 Mb, without a severe loss of sound quality. The songs could now be transferred very easily between people. This of course resulted in a whole lot of controversy...Remember the original Napster?

Yeah, yeah. Who cares?

Here's why it matters. In order to fit a lot of data in a small space, you have to take some stuff out. In other words, you lose sound quality. MP3 files allow for higher or lower amounts of compression, and usually this is expressed by bit rate. Basically, the higher the bit rate, the higher the sound quality.

Yeah, yeah. Who cares?

When playing music in the car, especially LOUD, sound quality matters a great deal. So, you'll want to be sure that when you play MP3s (or other digital music formats) in your vehicle, you use higher quality sound files. If you use poorly encoded music files, you'll definitely regret it!

Poorly encoded files tend to sound "tinny", or like they are being played through a can. Also, high frequency sounds such as cymbals and voice (especially when vocalists use words that contain the letter "S") sound "swishy". Bass tends to sound muddy and sloppy. When you play this stuff loud, it gets very annoying.

Anyway, if you plan to play digital music in your vehicle, be sure you are using high quality sound files. For MP3, the files should ALWAYS by 44.1 kHz. The bit rate should be at least 160, but preferably higher. I personally encode all of my files at 256.

Anyway, now you know about digital music in the vehicle!

Alan Bayer is an entrepreneur and car audio enthusiast. He runs an eBay store selling car stereo install supplies:

http://stores.ebay.com/honest-aebs-autosound/

He also has a GREAT website with car audio articles (such as the one from above). Also on the website, learn about car audio equipment, how to find the best equipment, how to install it, and save big bucks in the process!

http://www.honestaebs-caraudio.com/

Broadband Malaysia
Streamyx Combo
Streamyx Entry
Streamyx Combo 512k
Streamyx Speedometer
Streamyx Kuala Lumpur
Broadband Malaysia
Streamyx - No rental
Streamyx
Streamyx
Streamyx Free Gifts
Streamyx Combo 60
Streamyx Packages
Streamyx Combo 60
Streamyx Coverage